Thin & Rugged Android Industrial Tablet
Adopts an 8-inch screen, weighs only 580g, 13.3mm in thickness.
This ultrathin main body, together with first-of-its-kind side-edge
dual scan buttons,makes it more convenient for users to work on-site.
The whole device is extremely compact and small in size but has rich
functional interfaces. It supports various interfaces, including type-C,
USB, bottom pin port, and DC power port, making it convenient to
access various terminals on-site.
Regardless of core configurations such as processors and memory, as well
as functional features such as front and rear cameras, large speakers, and
accessories, all of them can satisfy the company's operational needs in the
next 3 to 5 years; In particular, equipped with iData's latest generation self-
developed scanning engine, it's able to reach longer scanning distance and
wider reading range, making on-site operations more efficient.
The sturdy housing design makes the device more competent to work
in complex environments. No matter if it falls to the ground accidentally
or is even washed by water, the device can still operate normally; It is
ultra-thin but has a long battery life. The large 7000mAh battery can
survive an entire long shift, making it more reliable for long-term usage.
| System Configuration | |
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 13.0 |
| Memory (ROM+RAM) | 64GB + 4GB (standard) |
| SIM | Two out of three SIM card slots, support dual SIM and dual standby. *Two out of three SIM card slots: two cards can be inserted at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card |
| Expansion Slot | Micro SD card (up to 512 GB) |
| Display Screen | 8-inch, resolution: 1280*800 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch operation |
| Camera | 13 megapixels rear camera, support PDAF/ auto-focus; 8 megapixels front camera |
| Flashlight | 1A flashlight |
| Keypad | 5 keypads in total: front scan key *2, power key on top *1, volume key on top *2 |
| Battery | 3.85V lithium battery, with 7000mAh, embedded |
| Audio | Microphone |
| Charging Method | Type-C charging, DC power interface and pin-port charging, support 18W fast charging |
| Reminder | Vibration reminder/LED reminder/high power speaker/audio reminder |
| System Configuration | Vibration reminder/LED reminder/high power speaker/audio reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/Proximity sensor/Light sensor/Geomagnetic sensor/ Gyroscope |
| ntercom Function (Optional) | Support one-button PTT calls |
| Structure Parameter | |
| Dimension (L*W*D) | 217mm*145mm*13.3mm |
| Weight | 580g (battery included) |
| Communication Transmission | |
| WWAN (Network Frequency) |
2G：B2/B3/B5/B8 3G：WCDMA：B1/B2/B5/B8 4G：B1/B2/B3/B4/B5/B7/B8/B12/B17/B19/B20/B28A/ B28B/B34/B38/B39/B40/B41 |
| WWAN (Data Service) |
GSM/GPRS/EDGE/UMTS/HSPA/HSPA+/WCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/ac (2.4G + 5G dual-band Wi-Fi), support fast roaming |
| Bluetooth | Bluetooth 5.0 BLE |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS |
| Environmental Parameter | |
| Working Temperature | -10℃ - 50℃ *Do not charge under low-temperature conditions for safety concerns |
| Storage Temperature | -30℃ - 70℃ (without battery) |
| Humidity | 10%- 95% (no moisture condensation) |
| Drop Specification | Multiple drops resistance from the height of 1.2m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Scanning Engine | |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| NFC (Optional) | |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 40 mm |
| Reading Distance | Within 40 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Communication Interface | |
| USB Interface | Type-C 3.0 (with headset function) *1, Type-A USB 2.0*1, Micro HDMI interface *1 |
| Power Interface | DC power interface*1 |
| OTG Interface | OTG Interface |
| Development Support | |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Accessories (More details in accessories guide) | |
| Standard Accessories | USB cable*1, device-back strap *1, power adapter*1 |
| Optional Accessories | Power adapter (fast-charging), charging dock, extension dock, protective film, multifunctional cradle |
| Note | |
| ****** | Due to irregular updates of the product line, the content is subject to change without notice. |
Contact
