New generation Android Keyboard/Touchcontrol Terminal
More efficient operation, improve enterprise management
iData K3S is a new generation Android keyboard terminal,
which has brand-new functions,enhanced battery life design.
K3S simplifies the operation of workers, and is more cost-effective.
Right angle and dip angle are available. The scan engine of dip angle version
can slide up to 28°, which is helpful for those workers who need to verify or
confirm after scanning. They can read and scan at the same time without
adjusting the angle.
While using the right-angle version, the screen will flip 180° for
workers to check and confirm scanning information when they
need to scan the barcodes whichare in the lower part of the shelves.
The workers need to hold the device upside down to scan so that they
could act fast in sorting and inventory, etc.
The specially designed keyboard layout and grip texture make workers feel
comfortable and easy to use. Whether it is holding upside down to scan or
input confirmation, workers can complete all operations effortlessly. And
the keypad and touch control of K3S can be operated while wearing gloves.
| System Configuration | |
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 12.0 (GMS) |
| Memory (ROM + RAM) | 64GB+4GB(standard) |
| SIM | Single SIM card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 4-inch, resolution: 800*480 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 8 megapixels of rear camera, support auto-focusing/PDAF |
| Flashlight | 800mA flashlight |
| Keypad | 30 keypads: front key*26, side scan key *2, side power key *1, side custom key*1 |
| Battery | 3.85V lithium battery, with 5000mAh, detachable |
| Audio | Built-in microphone |
| Charging Method | Type-C charging and pin port charging, support 18W fast charging |
| Reminder | High power speaker/Vibration reminder/LED reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/ Proximity sensor/Light sensor |
| Intercom Function (Optional) |
Support one-button PTT calls |
| Structure Parameter | |
| Dimension (L*W*D) | 162mm*68mm*19mm（the thickest part of dip-angle version is 29.4mm） |
| Weight | 278g (including the battery) |
| Communication Transmission | |
| WWAN (Network Frequency) |
2G：B2/B3/B5/B8 3G：WCDMA：B1/B5/B8 ，CDMA2000：BC0 4G：FDD-LTE：B1/B3/B5/B7/B8/B20，TDD-LTE： B34/B38/B39/B40/B41 |
| WWAN (Data Service) |
GSM/GPRS/EDGE/UMTS/HSPA/HSPA+/WCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0 |
| GPS | GPS/AGPS/Beidou/Galileo/GLONASS/QZSS |
| Environmental Parameter | |
| Working Temperature | -20℃ - 60℃ *Do not charge under low temperature conditions for the safety concerns |
| Storage Temperature | -40℃ - 70℃ (without the battery) |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Scanning Engine | |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| Communication Interface | |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Development Support | |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Accessories | |
| Standard Accessories | USB cable*1, power adapter*1, hand strap*1, device-back strap*1, battery*1 |
| Optional Accessories | Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, fanny pack, protective film |
| Note | |
| ****** | Due to irregular updates of the product line, the content is subject to change without notice. |
Contact
