Powerful Protection;
Industrial dedicated terminal
Drop resistant
Up to 1.8m anti-drop(with case) + 1000 times 0.5m roller drop protection
Dual-color injection molding housing; A better protective case
The main board protection design protects internal components from impact damage
IP68 ingress protection level; 100% dust poof
30 minutes water immersion capable 。
It can work long hours under the environment of -20℃ ~ 60℃
It can work both in high temperature workshop
and refrigeration house
60° tilt error tolerance, a wider reading range;
8m/s motion tolerance, a quicker reading rate for fast-moving barcodes
Easy to read hard-to-recognize barcodes, including DPM, Metal etching barcodes
Capable of up to 21.4m scanning engine
It can scan within seconds in both large warehouse or high goods shelf。
Extra grip for scanning available;
Multiple scanning ways for different situations
Professional three-side high brightness scanning indicators design;
2W large power speaker + dedicated vocal design
Get fast feedback after operating
Back groove design+
Back texture design.
A more comfortable way to grip
Long lasting batter life
6700mAh detachable big battery, it lasts 2 shift time.
It supports hot swap, no need to restart
18W fast charging compatible; It could be fully charge during the shift change
PTT(Push to Talk)Voice communication; It supports single call or group calls
Front-back dual noise canceling microphone, ensures a better voice effect
Real-time battery monitoring; It estimate remaining time for use.
Integrated batter management, it lowers the power consumption.
| System Configuration | |
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android12.0（GMS） |
| Memory (ROM+RAM) | 64GB + 4GB (standard) |
| SIM (eSIM: Not supported) |
Dual Nano SIM card WIFI ONLY version: No SIM, not supported |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 4-inch, resolution: 800*480 pixel |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13 megapixels of rear camera, support auto-focus/PDAF, 5 megapixels of front camera |
| Flashlight | 800mA flashlight |
| Keypad | Version A: Front key*29, side scan key *2, side PTT key *1, side ±volume key *2 Version B: Front key*38, side scan key *2, side PTT key *1, side ±volume key *2 |
| Battery | 3.85V lithium battery, with 6700mAh, detachable, backupbattery support |
| Audio | Built-in dual microphone ( noise-canceling microphone) |
| Charging Method | Type-C charging and pin port charging, support 9V/2A, 5V/3A fast charging |
| Reminder | High-power speaker/3 sides scan LED reminder/Vibration reminder/Charging LED reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensor | G-sensor/ Proximity sensor/Light sensor |
| Intercom Function (Optional) | Supporting one-button PTT calls |
| Structure Parameters | |
| Dimension (L*W*D) | 205mm*76mm*31mm |
| Weight | 440g (including the battery) |
| Communication Transmission | |
| WWAN(Network Frequency) | Chinese & Eurasian Version 2G：B2/B3/B5/B8 3G：WCDMA:B1/B5/B8，CDMA BC0，TD-SCDMA:B34/B39 4G：FDD-LTE:B1/B3/B5/B7/B8/B20，TDD-LTE:B34/B38/B39/B40/B41 WIFI ONLY version: Not supported |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE. WIFI ONLY version: Not supported |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0, support BLE |
| GPS | GPS/AGPS/Beidou/Galileo/GLONASS/QZSS |
| Environmental Parameter | |
| Working Temperature | -20℃ - 60℃ *Do not charge under low temperature conditions for the safety Concerns |
| Storage Temperature | -40℃~70℃（Without battery） |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m (without protective case) Multiple drops to concrete floor from the height of 1.8m (with protective case) |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP68 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Scanning Engine | |
| Barcode Type | It can scan one-dimensional / two--dimensional barcodes |
| Scanning Accuracy | ≥3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| NFC (Standard) | |
| Working Frequency | 13.56MHz |
| Reading Distance | Within 60mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Communication Interface | |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Development Support | |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Accessories | |
| Standard Accessories | USB cable*1, hand strap *1, power adapter*1,device-back strap*1, battery*1 |
| Optional Accessories | Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, pistol grip, protective case |
| Note | |
| ****** | Due to irregular updates of the product line, the content is subject to change without notice. |
Contact
