Large-screen intelligent mobile terminal
It can bring strongly protected experience in touch control data acquisition
for your employees at the forefront of your business
The 5.5-inch full screen thin PDA that can be held in one hand with 18:9 screen design ratio,
supporting multitask split screen operation,
230G easy holding feeling, zero burden to carry,
and more convenient operation.
1.5m fall resistant, IP68 dustproof and waterproof, noise resistant, cold and heat resistant,
visible under strong screen light, gloves & wet and dry hand touch
Deep optimization, fast roaming, easy to handle more complex Wi-Fi scenarios.
Face recognition, accurate, front-loading of 5 million + rear-loading of 13 million double photo design, and accurate face recognition function.
It can quickly identify fingerprint and unlock,
and support multiple fingerprint identification applications,
fully meeting the requirements of various mobile applications of enterprises.
(Customizable) Quickly implements "one-to-one "and "one-to-many "calls.
| System Configuration | |
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 10.0（GMS） |
| Memory (ROM+RAM) | 64GB + 4GB (standard) |
| SIM (eSIM: Not supported) |
Two out of three SIM card slots, support dual SIM and dual standby * Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card Wi-Fi Only：SIM not available, not supported |
| Expansion Slot | Micro SD card (up to 256 GB) Wi-Fi Only: Expansion slot not available |
| Display Screen | 5.5-inch, resolution: 1440*720 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 13MP rear camera, support auto-focus/PDAF, 5MP front camera |
| Flashlight | 800mA flashlight |
| Keyboard | 3 keys in total, side scan key*2, side power key*1 |
| Battery | 3.85V lithium battery, with 5000mAh, undetachable |
| Audio | Built-in dual microphone (noise-canceling microphone) |
| Charging Method | Type-C charging and pin port charging, support 10W fast charging |
| Reminder | Vibration reminder/LED reminder/Audio reminder |
| Fingerprint Identification (Optional) | Support back fingerprint recognition |
| Vibrating Motor | Built-in vibrating motor |
| Sensor | G-sensor/ Proximity sensor/Light sensor |
| Intercom Function (Optional) | Supporting one-button PTT calls |
| Structure Parameter | |
| Dimension (L*W*D) | 157mm*74mm*13.6mm |
| Weight | 230g (including the battery) |
| Communication Transmission | |
| WWAN (Network Frequency) | 2G：B2/B3/B5/B8 3G：WCDMA：B1/B5/B8，CDMA：BC0，TD-SCDMA:B34/B39 4G：FDD-LTE：B1/B3/B5/B7/B8/B20，TDD-LTE：B34/B38/B39/B40/B41 WIFI ONLY version: SIM not available, not supported |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE WIFI ONLY version: SIM not available, not supported |
| WLAN | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0, support BLE |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
| Environmental Parameter | |
| Working Temperature | -20℃ - 60℃ *Do not charge under low temperature conditions for the safety Concerns |
| Storage Temperature | -40℃ - 60℃（Without battery） |
| Humidity | 0 - 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meters |
| Ingress Protection | IP68 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Scanning Engine (Optional) | |
| Barcode Type | It can scan one-dimensional / two--dimensional barcodes |
| Scanning Accuracy | ≥3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
| NFC (Optional) | |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 30 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Communication Interface | |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Development Support | |
| Programming Language | Java |
| API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Accessories | |
| Standard Accessories | USB cable*1, hand strap *1, power adapter*1 |
| Optional Accessories | Single charging cradle, 4-slot charging cradle, fanny pack, protective case, protective film |
| Note | |
| ****** | Due to irregular updates of the product line, the content is subject to change without notice. |
Contact
