T2

K8

iData T2

Light and thin screen, showing excellence

主体.png

4G network, more efficient for outdoor operations

4G network, more efficient for outdoor operations

Multiple networks compatible, lower cost

Dual SIM dual standby, 4G full Netcom;
Pick the best carrier based on different situations.
It could be used in multiple places and pick the local carriers for a lower cost.

主体.png

Large HD screen, clear display outdoors

6.21-inch waterdrop screen, 1520*720 ultra-high Definition.
The display is more precise and exquisite;
Eye fatigue-free reading under strong light conditions outdoors

Powerful core platform

Octa-core 2.0Hz CPU + Android 11.0, faster running speed;
CPU adopts the 7nm technique, higher performance, and lower power consumption;
5.0 Bluetooth compatible, no disconnecting in long-distance outdoors.

主体.png

Field operations with long-lasting battery support

4500 mAh ultra-large capacity battery, worry-free battery life under strong light condition
The battery is detachable, easy to replace when it’s out of battery outdoors.

T2 Specifications

System Configuration
Processor Octa-core 2.0GHz high-performance processor
Operating System Android12.0(GMS)
Memory (ROM+RAM) 64GB + 4GB (standard)
SIM Two out of three SIM card slots, support dual SIM and dual standby
* Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card
Expansion Slot Micro SD card (up to 256 GB)
Display Screen 6.21-inch, resolution: 1520*720 pixels
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 16 megapixels rear camera + 0.3 megapixels sub-camera, 5 megapixels front camera, support auot-focus
Flashlight 800mA flashlight
Keypad 5 keypads in total: side scan key *2, side power key *1, side ±volume key *2
Battery 3.85V lithium battery, with 4500mAh, detachable
3.85V lithium battery, with 4200mAh, detachable, support NFC, wireless charging
Audio Built-in dual microphone
Charging Method Type-C charging and pin port charging, support 18W fast charging
Reminder High-power speaker/Vibration reminder/LED reminder/Audio reminder
Fingerprint Recognition Support back fingerprint recognition
Vibrating Motor Built-in vibrating motor
Sensor G-sensor/Proximity sensor/Light sensor/Geomagnetic sensor/ Gyroscope
Intercom Function (Optional) Supporting one-button PTT calls
Structure Parameters
Dimension (L*W*D) 168mm*79mm*13.7mm
Weight 245g (including the battery)
Communication Transmission
WWAN (Network Frequency) China & Eurasian version:
2G:B2/B3/B5/B8
3G:WCDMA:B1/B5/B8 ,CDMA BC0,TD-SCDMA: B34/B39
4G:FDD-LTE:B1/B3/B5/B7/B8/B20,TDD-LTE: B34/B38/B39/B40/B41
American version:
2G:B2/B3/B5
3G:B1/B2/B4/B5, CDMA BC0/BC1(US)
4G:B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41
WWAN (Data Service) GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE
WLAN Function Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support fast roaming
Bluetooth Bluetooth 5.0
GPS GPS/AGPS/Beidou/Galileo/GLONASS/QZSS
Environmental Parameter
Working Temperature -20℃ - 60℃
*Do not charge under low temperature conditions for the safety Concerns
Storage Temperature -40℃ - 70℃ (Without battery)
Humidity 0 - 95% (no moisture condensation)
Drop Specification Multiple drops to concrete floor from the height of 1.5m
Roller Drop Specification 1000 times of roller drops from a height of 1 meter
Ingress Protection IP67
ESD Protection ±15KV (air discharge), ±8KV (contact discharge)
Scanning Engine
Barcode Type It can scan one-dimensional / two--dimensional barcodes
Scanning Accuracy ≥3.33mil
Scanning Angle Pitch: ±60°; Skew:±45°; Tilt:360°
View Angle Horizontal:44.3°,Vertical:28.4°,Diagonal:51°
Motion Error Tolerance 8m/s
NFC (Optional)
Reading Distance Within 60 mm
Communication Protocol ISO14443A/14443B/15693
Communication Interface
USB Interface Type-C (with headset function) *1
OTG Interface Support
Development Support
Programming Language Java
Development API iScan API (Scan Development Kit), Device API (Device Management/Configuration Development Kit), Android standard interface
Development Tool Eclipse/Android Studio
Accessories
Standard Accessories USB cable*1, hand strap *1, power adapter*1,device-back strap*1, battery*1
Optional Accessories Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, fanny pack, protective film, Protective case
Note
****** 1.Due to irregular updates of the product line, the content is subject to change without notice.
2.4G/5G version available.Kindly download product leaflet for detailed product parameters.
Contact UsContact
Contact Us