i3 UHF

iData i3 UHF

Small-sized gun, redefine RFID

主图 右.png

Lead the RFID "Small" era wave

Lightweight and portable UHF equipment, the whole machine weight can be up to 185g,
it can be easily carried or hung on the wrist, so that your staff will not feel the burden after a long time of use;
Although the body is small, it has a large battery of 3000mAh and unique system power-saving technology,
which can fully meet the use needs of your staff in a shift.

主体 右.png

Excellent UHF performance,
the read distance can be far or close

The built-in UHF RFID can make the scanning operation more flexible ;
Output power of 0~25dBm is adjustable +SJC technology, read and write distance can be far or close, no miss canning.

主体 右.png
i3 UHF.jpg
主体 整图 左右都可以.png

The little thing is "very"durable

IP54 protection class + over a million times of button life, the small body can also be very durable.

The lower deployment threshold

4 core 2.0GHz high-speed processor and 2GB RAM+16GB ROM high-end
configuration can ensure that your equipment can be used for a long time,
prolong your purchase cycle, and reduce your purchase cost;
If you purchase in mass, the budget costs will be more reduced for 40%,
and you can use the same volume of budget costs for purchasing,
the iData i3 UHF gives you a 67% increase in value, and which can play maximum utility
at the same time of reducing the deployment threshold.

主体 靠右.png

i3 UHF Specifications

System Configuration
Processor Quad-core 2.0GHz high-performance processor
Operating System Android 10.0
Memory (ROM+RAM) 16GB+2GB
SIM Single SIM card
Display Screen 3.2-inch, resolution: 800*480 pixels
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 8 megapixels rear camera, support auto-focus
Flashlight 800mA flashlight
Keypad 24 keypads in total: front scan key *21, side scan key *2, side power key *1
Battery 3.85V lithium battery, with 3000mAh, undetachable
Audio Built-in microphone
Charging Method Type-C charging, support 18W fast charging
Reminder High power speaker reminder/vibration reminder/LED reminder/Audio reminder
Vibrating Motor Built-in vibrating motor
Sensor G-sensor
Intercom Function (Optional) Support one-button PTT calls
Structure Parameter
Dimension (L*W*D) 158mm*54mm*18.5mm
Weight 185 g (including the battery)
Communication Transmission
WWAN (Network Frequency) China & Eurasian version:
2G: B2/B3/B5/B8
3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA: B34/B39
4G: FDD-LTE: B1/B3/B5/B7/B8/B20,TDD-LTE: B34/B38/B39/B40/B41
American version:
2G:B2/B3/B5
3G:B1/B2/B4/B5
4G:B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41
WWAN (Data Service) GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE
WLAN Function Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier, fast roaming
Bluetooth Bluetooth 5.0, support BLE
GPS GPS/AGPS/BDS/Galileo/GLONASS/QZSS
Environmental Parameter
Working Temperature -20℃ - 60℃
*Do not charge under low temperature conditions for the safety Concerns
Storage Temperature -40℃ - 70℃ (without the battery)
Humidity 0 - 95% (no moisture condensation)
Drop Specification Multiple drops to concrete floor from the height of 1.5m
Ingress Protection IP54
ESD Protection ±15KV (air discharge), ±8KV (contact discharge)
Scanning Engine
Barcode Type It can scan one-dimensional / two--dimensional barcodes
Scanning Accuracy ≥3.33mil
Scanning Angle Pitch: ±60°; Skew:±45°; Tilt:360°
View Angle Horizontal:44.3°,Vertical:28.4°,Diagonal:51°
Motion Error Tolerance 8m/s
UHF RFID
Communication Protocol ISO18000-6C/EPC Class1 Gen2
Working Frequency 920MHz~925MHz
Output Power 0~25dBm
Reading Distance Up to 1.5m
Communication Interface
USB Interface Type-C (with headset function) *1
OTG Interface Support
Development Support
Programming Language Java
Development API iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface
Development Tool Eclipse/Android Studio
Accessories
Standard Accessories USB cable*1, hand strap *1, power adapter*1
Optional Accessories Fanny pack, protective case
Note
****** As the product line is updating from time to time, the information in this document is subject to change without notice.
Contact UsContact
Contact Us